The construction of the football arena under the key
We will build a football indoor stadium according to the SP and SNiP
Time is fleeting. The construction of sports facilities is reaching a new level. If earlier the main request in the construction of a football arena was its price and temporary construction, now they began to pay attention to the regulatory acts and rules of construction in the Russian Federation under the SP — code of rules and SNiP. For us, builders who have always adhered to the norms in construction, it is time to realize our potential to the full. We don't need to switch to new tracks, we have been on them for a long time and are increasing our speed every year.
The construction of the football arena under the key
DESIGN in full COMPLIANCE with the Russian Federation STANDARDS
OUR DESIGNS ARE FULLY ADAPTED TO RUSSIAN CLIMATIC CONDITIONS.
HELPS to AVOID Collapse of buildings.
AT WHAT EXPENSE? We do not underestimate snow and wind loads and act strictly in accordance with the SNiP and SP
CONCLUSION: The vast majority of manufacturers of tent structures do not calculate their designs for full snow loads, believing in the misconception that snow does not linger on the tent cover, without justifying their assumptions not by standards, not by any research. However, the realities of the Russian climate lead to the collapse of such lightweight structures, showing that snow may well accumulate on the awning cover and at high angles of roof slope, which is reflected in the JV "Load and impact" 20.1 3330.2016.
A strong metal frame designed for full snow loads in accordance with the standards of the Russian Federation, allows you to avoid collapses due to the accumulation of snow on the roof due to freezing wet snow, icy rain and other weather events that are quite common for most of the territories of the Russian Federation, but which are not designed for structures imported from other countries (or copied from them).
The right frame of the building
THE SMALL HEIGHT OF OUR FRAME ALLOWS YOU TO REDUCE THE AMOUNT OF UNUSED SPACE INSIDE THE BUILDING.
HELPS to AVOID: increased costs for heating the building.
AT WHAT EXPENSE? Our design does not imply the presence of excess volume under the roof of the building, which is not used in any way, but you, nevertheless, regularly incur the cost of heating it.
CONCLUSION: There is no point in heating the air for air's sake.
ALLOWS YOU TO INCREASE THE HEIGHT OF THE WALLS.
Will HELP to AVOID the construction of buildings with a high ridge.
AT WHAT EXPENSE? Low height of the frame.
This is especially important, for example, in the construction of sports facilities and warehouses, for which the height of the vertical wall is important.
CONCLUSION: a Small height allows you to build a building with a large useful volume, while the overall height of the structure does not change and meets construction requirements.
A wide range of additional services
IT will help to AVOID: excessive costs for the development of accompanying documentation and inconveniences during further operation.
AT WHAT EXPENSE? Thanks to the accumulated experience and a large number of completed projects, we offer a comprehensive solution for any communications in your future buildings.
CONCLUSION: it is Better and easier to trust professionals and follow the already proven path, using design solutions proven over many years of operation.
Production and technology
Thanks to production in the Moscow region, starting from design development, working design documentation, manufacturing of awning coverings and ending with the production and installation of turnkey products, our structures have a low price. Production in the company is equipped with the most advanced technologies: semi-automatic welding in a protective environment, semi-automatic welding of materials for tent architecture, automated control of products. The company has implemented a system of end-to-end accounting and automation of all production and business processes.
Mounting
Tent-mobile structure of modular type is a product of full factory readiness. Installation of the structure can be carried out on concrete, asphalt concrete and reinforced concrete bases. Tent-mobile structures can be designed for any climate conditions.
Frame
The metal frame is an arched collapsible single-span (without internal supports) truss-type structure with longitudinal connections. Frame connections are made from the same type of unified elements. The connection of the individual elements of the frame to each other is made using split connections. The frame is made according to the design documentation and SNiP 11-23-81 (1990) "Steel structures". Materials for structures and connections comply with SNiP 11-23-81 (1990). The step of sections is selected taking into account SNiP 2.0107-85 (2003) "Loads and impacts" All frame Assembly units are pre-assembled at the enterprise. The purpose of consolidation is to minimize the number of Assembly operations when installing the product. Installation of structures takes 2-3 days.
The sizes of our arenas
The construction of the football arena under the key
The technologies we use in design and construction allow us to create diverse sports facilities. You can order a project, manufacture and installation of structures with a span width from 20 meters to 75-80 meters. This allows you to build a football arena for playing minifootball, a medium-sized arena with a field width of 38x68 for a game of 8x8, or cover a full-fledged football field of 68x110 for a game of 11x11. Not only that, there is enough space to accommodate the stands. Standard side walls of the sports arena are 5-6 meters, and if you wish, this size can be 10-12 meters in height. Note that we do not even allow the phrase "sail". Our frames, taking into account the metal of 5 mm and the calculated weight of the metal structure from 31 kg/m2, have strength characteristics comparable to capital structures. That is why, in fact, without making a large mark-up on their work, we have come to a tight pricing approach to companies with the metal content of their structures from 19 to 25 kg/m2, with the declared thickness of the profile pipe from 3 mm and that is not a fact. Our goal is to build as many reliable, long-lasting, non-corroding sports facilities as possible in accordance with the requirements of construction standards in Russia.
The construction of the football arena under the key
Cover
The construction of the football arena under the key
Material for awning architecture (fencing) manufactured using advanced technologies — awning from a special fabric based on polyester with a double-sided PVC coating. The material has unique properties: resistance to gasoline and oil, the ability to weld HDPE and heat welding, water resistance, high strength, which makes it possible to use it in all areas of industry, agriculture, in the construction of sports facilities. The material does not support Gorenje, withstands high temperatures and does not ignite when a fire occurs inside or near the tent-mobile structure. The material is available in various colors and types of finishes. It is possible to use a light-transmitting fabric that provides low lighting costs due to a light-permeable coating. Due to the pre-tension of the tent fabric, the structure has increased rigidity and strength. Installation of tent-mobile structures is not capital construction, so it avoids a number of issues related to the registration of documents for the product. The structures can withstand repeated Assembly and are compact in transportation.
UNIQUE "FLEXIBLE SANDWICH" TECHNOLOGY
Flexible Sandwich-a type of enclosing structures designed for insulation of buildings and structures. It consists of two layers of tent fabric with an inner layer of insulation.
HELPS to AVOID: leaks in the rain and freezing of the building in the cold season. Flexible sandwich is a three-layer system consisting of: high-strength fabric with PVC coating and non-flammable fiber insulation made from mineral raw materials. The insulation is located between layers of fabric with PVC coating, which form a "sealed pocket". This three-layer system provides a complete vapor BARRIER of the insulation and reduces losses during infiltration. Condensation of water vapor on the frame elements is eliminated, thereby improving the insulation efficiency. The fully controlled structure helps facilitate air conditioning and internal heating.
You avoid defects during the installation of the building, which is much more difficult to detect on the construction site than in production, and in the future you get an energy-efficient structure and save on space heating.
ADVANTAGES OF THE "FLEXIBLE SANDWICH"
The coating undergoes extensive Assembly in production conditions and quality control of the joints. Full-fledged thermal insulation and hermetic one-piece tent cover, allows up to 10 times to reduce heat loss in the structure.
1. Non-combustible insulation. With a small thickness of the tent shell and a significant thickness of the insulation, it has a positive effect on the fire resistance of the coating as a whole.
2. The integrity of the coating. The number of Assembly operations at the installation site is minimized.
Z. the Absence of cold bridges.
4. the Possibility of wide variation in the thickness of the insulation. Allows you to achieve energy efficiency of the structure in any climate zone.
5. "Open" metal frame. Allows you to freely install, maintain engineering systems, monitor the condition of the metal frame and the tension of the awning.
The construction of the football arena under the key
TO BUILD BUILDINGS, NOT CLOSING THE FARM AT THE BOTTOM.
The construction of the football arena under the key
+7 (985) 920-85-20 Moscow
+7 (910) 408-56-65
+7 (978) 789-85-86 Simferopol
utepla@mail.ru
https://utepla.com/
https://utepla.ru/
https://tentangar.com/
Time is fleeting. The construction of sports facilities is reaching a new level. If earlier the main request in the construction of a football arena was its price and temporary construction, now they began to pay attention to the regulatory acts and rules of construction in the Russian Federation under the SP — code of rules and SNiP. For us, builders who have always adhered to the norms in construction, it is time to realize our potential to the full. We don't need to switch to new tracks, we have been on them for a long time and are increasing our speed every year.
The construction of the football arena under the key
DESIGN in full COMPLIANCE with the Russian Federation STANDARDS
OUR DESIGNS ARE FULLY ADAPTED TO RUSSIAN CLIMATIC CONDITIONS.
HELPS to AVOID Collapse of buildings.
AT WHAT EXPENSE? We do not underestimate snow and wind loads and act strictly in accordance with the SNiP and SP
CONCLUSION: The vast majority of manufacturers of tent structures do not calculate their designs for full snow loads, believing in the misconception that snow does not linger on the tent cover, without justifying their assumptions not by standards, not by any research. However, the realities of the Russian climate lead to the collapse of such lightweight structures, showing that snow may well accumulate on the awning cover and at high angles of roof slope, which is reflected in the JV "Load and impact" 20.1 3330.2016.
A strong metal frame designed for full snow loads in accordance with the standards of the Russian Federation, allows you to avoid collapses due to the accumulation of snow on the roof due to freezing wet snow, icy rain and other weather events that are quite common for most of the territories of the Russian Federation, but which are not designed for structures imported from other countries (or copied from them).
The right frame of the building
THE SMALL HEIGHT OF OUR FRAME ALLOWS YOU TO REDUCE THE AMOUNT OF UNUSED SPACE INSIDE THE BUILDING.
HELPS to AVOID: increased costs for heating the building.
AT WHAT EXPENSE? Our design does not imply the presence of excess volume under the roof of the building, which is not used in any way, but you, nevertheless, regularly incur the cost of heating it.
CONCLUSION: There is no point in heating the air for air's sake.
ALLOWS YOU TO INCREASE THE HEIGHT OF THE WALLS.
Will HELP to AVOID the construction of buildings with a high ridge.
AT WHAT EXPENSE? Low height of the frame.
This is especially important, for example, in the construction of sports facilities and warehouses, for which the height of the vertical wall is important.
CONCLUSION: a Small height allows you to build a building with a large useful volume, while the overall height of the structure does not change and meets construction requirements.
A wide range of additional services
IT will help to AVOID: excessive costs for the development of accompanying documentation and inconveniences during further operation.
AT WHAT EXPENSE? Thanks to the accumulated experience and a large number of completed projects, we offer a comprehensive solution for any communications in your future buildings.
CONCLUSION: it is Better and easier to trust professionals and follow the already proven path, using design solutions proven over many years of operation.
Production and technology
Thanks to production in the Moscow region, starting from design development, working design documentation, manufacturing of awning coverings and ending with the production and installation of turnkey products, our structures have a low price. Production in the company is equipped with the most advanced technologies: semi-automatic welding in a protective environment, semi-automatic welding of materials for tent architecture, automated control of products. The company has implemented a system of end-to-end accounting and automation of all production and business processes.
Mounting
Tent-mobile structure of modular type is a product of full factory readiness. Installation of the structure can be carried out on concrete, asphalt concrete and reinforced concrete bases. Tent-mobile structures can be designed for any climate conditions.
Frame
The metal frame is an arched collapsible single-span (without internal supports) truss-type structure with longitudinal connections. Frame connections are made from the same type of unified elements. The connection of the individual elements of the frame to each other is made using split connections. The frame is made according to the design documentation and SNiP 11-23-81 (1990) "Steel structures". Materials for structures and connections comply with SNiP 11-23-81 (1990). The step of sections is selected taking into account SNiP 2.0107-85 (2003) "Loads and impacts" All frame Assembly units are pre-assembled at the enterprise. The purpose of consolidation is to minimize the number of Assembly operations when installing the product. Installation of structures takes 2-3 days.
The sizes of our arenas
The construction of the football arena under the key
The technologies we use in design and construction allow us to create diverse sports facilities. You can order a project, manufacture and installation of structures with a span width from 20 meters to 75-80 meters. This allows you to build a football arena for playing minifootball, a medium-sized arena with a field width of 38x68 for a game of 8x8, or cover a full-fledged football field of 68x110 for a game of 11x11. Not only that, there is enough space to accommodate the stands. Standard side walls of the sports arena are 5-6 meters, and if you wish, this size can be 10-12 meters in height. Note that we do not even allow the phrase "sail". Our frames, taking into account the metal of 5 mm and the calculated weight of the metal structure from 31 kg/m2, have strength characteristics comparable to capital structures. That is why, in fact, without making a large mark-up on their work, we have come to a tight pricing approach to companies with the metal content of their structures from 19 to 25 kg/m2, with the declared thickness of the profile pipe from 3 mm and that is not a fact. Our goal is to build as many reliable, long-lasting, non-corroding sports facilities as possible in accordance with the requirements of construction standards in Russia.
The construction of the football arena under the key
Cover
The construction of the football arena under the key
Material for awning architecture (fencing) manufactured using advanced technologies — awning from a special fabric based on polyester with a double-sided PVC coating. The material has unique properties: resistance to gasoline and oil, the ability to weld HDPE and heat welding, water resistance, high strength, which makes it possible to use it in all areas of industry, agriculture, in the construction of sports facilities. The material does not support Gorenje, withstands high temperatures and does not ignite when a fire occurs inside or near the tent-mobile structure. The material is available in various colors and types of finishes. It is possible to use a light-transmitting fabric that provides low lighting costs due to a light-permeable coating. Due to the pre-tension of the tent fabric, the structure has increased rigidity and strength. Installation of tent-mobile structures is not capital construction, so it avoids a number of issues related to the registration of documents for the product. The structures can withstand repeated Assembly and are compact in transportation.
UNIQUE "FLEXIBLE SANDWICH" TECHNOLOGY
Flexible Sandwich-a type of enclosing structures designed for insulation of buildings and structures. It consists of two layers of tent fabric with an inner layer of insulation.
HELPS to AVOID: leaks in the rain and freezing of the building in the cold season. Flexible sandwich is a three-layer system consisting of: high-strength fabric with PVC coating and non-flammable fiber insulation made from mineral raw materials. The insulation is located between layers of fabric with PVC coating, which form a "sealed pocket". This three-layer system provides a complete vapor BARRIER of the insulation and reduces losses during infiltration. Condensation of water vapor on the frame elements is eliminated, thereby improving the insulation efficiency. The fully controlled structure helps facilitate air conditioning and internal heating.
You avoid defects during the installation of the building, which is much more difficult to detect on the construction site than in production, and in the future you get an energy-efficient structure and save on space heating.
ADVANTAGES OF THE "FLEXIBLE SANDWICH"
The coating undergoes extensive Assembly in production conditions and quality control of the joints. Full-fledged thermal insulation and hermetic one-piece tent cover, allows up to 10 times to reduce heat loss in the structure.
1. Non-combustible insulation. With a small thickness of the tent shell and a significant thickness of the insulation, it has a positive effect on the fire resistance of the coating as a whole.
2. The integrity of the coating. The number of Assembly operations at the installation site is minimized.
Z. the Absence of cold bridges.
4. the Possibility of wide variation in the thickness of the insulation. Allows you to achieve energy efficiency of the structure in any climate zone.
5. "Open" metal frame. Allows you to freely install, maintain engineering systems, monitor the condition of the metal frame and the tension of the awning.
The construction of the football arena under the key
TO BUILD BUILDINGS, NOT CLOSING THE FARM AT THE BOTTOM.
The construction of the football arena under the key
+7 (985) 920-85-20 Moscow
+7 (910) 408-56-65
+7 (978) 789-85-86 Simferopol
utepla@mail.ru
https://utepla.com/
https://utepla.ru/
https://tentangar.com/
Комментарии
Отправить комментарий